Hello and welcome to Rugged Science ...

1

IGS-9844GPF(X) 16-port Managed Ethernet Switch

You are here

  • Supports O-Ring (recovery time < 30ms over 250 units of connection)and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring supports multi-vendor ring technology in open architecture
  • O-Chain for multiple redundant network rings
  • Supports standard IEC 62439-2 MRP (Media Redundancy Protocol) functions
  • Supports IEEE 1588v2 clock synchronization


The IGS-9844GPF(X) is a managed redundant ring Ethernet switch with eight 10/100/1000Base-T(X) ports, four 100/1000Base-X SFP ports, and four 100Base-FX (IGS-9844GPFX series) or four 1000Base-X (IGS-9844GPF series) optical fiber port with SC connector. Complete with support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) protect mission-critical applications from network interruptions and temporary malfunctions with fast recovery technology. This ethernet switch is prepared for any environment by its wide operating temperature range(from -40ºC to 70ºC). The IGS-9844GPF(X) can be managed, centralized, and made convenient by Open-Vision, Telnet, and console (CLI) configuration. This switch is the complete package for highly-managed and Fiber Ethernet applications.

ORing Switch Model IGS-9844GPF-MM-MM IGS-9844GPFX-MM IGS-9844GPF-SS IGS-9844GPFX-SS
Physical Ports    
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX

8

100/1000Base-X with SFP port

4

Fiber Ports Number

4

Fiber Ports Standard 1000Base-SX 100Base-FX 1000Base-LX 100Base-FX
Fiber Mode Multi-mode Multi-mode Single-mode Single-mode
Fiber Diameter (μm) 62.5/125 μm
50/125 μm
62.5/125 μm
50/125 μm
9/125 μm 9/125 μm
Fiber Optical Connector SC SC SC SC
Fiber Ports Specifications Typical Distance (km) 0.55 km 2 km 10 km 30 km
Wavelength (nm) 850 nm 1310 nm 1310 nm 1310 nm
Max. Output Optical Power (dBm) -4 dBm -14 dBm -3 dBm -8 dBm
Min. Output Optical Power (dBm) -9.5 dBm -23.5 dBm -9.5 dBm -15 dBm
Max. Input Optical Power(Saturation 0 dBm 0 dBm -3 dBm 0 dBm
Min. Input Optical Power (Sensitivity) -18 dBm -31 dBm -20 dBm 34 dBm
Link Budget (dB) 8.5 dB 7.5 dB 10.5 dB 19 dB
     
Technology    
  Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX 
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control 
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) 
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) 
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switch Properties Switching latency : 7 μs 
Switching bandwidth : 32Gbps
Max. Number of Available VLANs : 256 
IGMP multicast groups : 128 for each VLAN 
Port rate limiting : User Define
Jumbo Frame up to 9.6K Bytes
Security Feature Enable/disable ports, MAC based port security 
Device Binding security feature 
Port based network access control (802.1x) 
VLAN (802.1q ) to segregate and secure network traffic 
Supports Q-in-Q VLAN for performance & security to expand the VLAN space 
Radius centralized password management 
SNMPV1/V2c/V3 encrypted authentication and access security 
Https / SSH enhance network security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported 
Quality of Service (802.1p) for real-time traffic 
VLAN (802.1Q) with VLAN tagging
IGMP Snooping for multicast filtering 
IP-based bandwidth management 
Application-based QoS management 
DOS/DDOS auto prevention 
Port configuration, status, statistics, monitoring, security 
DHCP Server/Client/Relay
Modbus TCP
Network Redundancy

O-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP comtatible)
Fast Recovery

Warning / Monitoring System Relay output for fault event alarming 
Syslog server / client to record and view events 
Include SMTP for event warning notification via email 
Event selection support
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. Baud rate setting: 115200bps, 8, N, 1
LED Indicators    
Power Indicator (PWR) Green : Power LED x 3
Fault Indicator (Fault) Amber : Indicate unexpected event occurred
R.M. Indicator (R.M) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system is operating in O-Ring mode
10/100/1000Base-T(X) RJ45 Port Indicator Green LED for 1000Mbps Link/Act indicator,  Amber LED for 10/100Mbps Link/Act indicator
100/1000Base-X SFP Port Indicator Green for port Link/Act.
100Base-FX or 1000Base-X Fiber Port Indicator Green for port Link/Act.
Fault contact    
Relay Relay output to carry capacity of 1A at 24VDC
Power    
Redundant Input Power Dual DC inputs. 12~48VDC on 6-pin terminal block
Power Consumption (Typ.)

15 watts

Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristics    
Enclosure IP-30
Dimensions (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H)mm (3.8 x 4.15 x 6.06 inch)
Weight (g) 1100 g
Environmental    
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing  
Regulatory Approvals    
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
     
Warranty 5 years

Rugged Science is an ISO 9001 Certified Company