Hello and welcome to Rugged Science ...

1

RGS-7244GP 28-Port Rackmount Ethernet Switch

You are here

  • Contains 24x10/100/1000Base-T(X) and 4x1000Base-X SFP ports
  • Supports Jumbo frame up to 9K Bytes
  • Includes O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy
  • Open-Ring supports the other technologies in open architecture
  • O-Chain allows multiple redundant network rings
  • Supports standard IEC 62439-2 MRP (Media Redundancy Protocol) function


The RGS-7244GP managed redundant ring Ethernet switch is designed with twenty four 10/100/1000Base-(TX) ports and four 1000Base-X SFP ports. Complete with Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect mission-critical applications from network interruptions and temporary malfunctions via fast recovery technology. Using O-Ring’s thunder switch provides advanced IP-based bandwidth management which can control the maximum bandwidth for each IP device. Users can configure IP cameras and NVRs with more bandwidth while simultaneously managing other device bandwidth. This Ethernet switch also incorporates application-based QoS, which enables priority ot be set for data stream according to TCP/UDP port number. Its special Device Binding function can permit only allowed IP address with MAC address to access the networking. Hackers are eliminated as this switch consistently blocks them from the IP surveillance network. It can prevent stolen video privacy data and attacks on IP cameras, NVRs, and controllers. This switch continues to protect through advanced DOS/DDOS auto prevention. If the IP begins to overflow, the switch will lock the source IP address to prevent and end the attack. It is a hardware-based prevention, allowing it to prevent DDOS attacks immediately and completely. All included functions of the RGS-7244GP can be managed, centralized, and made convenient by Open-Vision v3.0, Telnet, and console (CLI) configuration. This switch offers the most reliable applications for highly-managed and Gigabit Fiber Ethernet applications.

Features

•Support 24x10/100/1000Base-T(X) and 4x1000Base-X SFP ports
•Support Jumbo frame up to 9K Bytes
•Support O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE     802.1s/w/D) for Ethernet      Redundancy
•Open-Ring support the other vendor’s ring technology in open architecture
•O-Chain allow multiple redundant network rings
•Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
•Provide Fast recovery technology for Ethernet multi-redundancy
•Support Jumbo frame up to 9.6K Bytes
•Support IPV6 new internet protocol version
•Support IP-based bandwidth management
•Support application-based QoS management
•Support Device Binding security function
•Support DOS/DDOS auto prevention
•IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
•Support SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
•Support ACL, 802.1x User Authentication for security
•Multiple notification for warning of unexpected event
•Windows utility (Open-Vision 3.0) support centralized management and configurable by Web-based     interface, Telnet and Console (CLI)
•Support LLDP Protocol
•19 inches rack mountable design 

 

 

Specifications
ORing Switch Model RGS-7244GP
Physical Ports  
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 24
1000Base-X SFP Port 4
Technology  
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Priority Queues 4
Switch Properties Switching latency: 7 μs
Switching bandwidth: 56Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Security Features Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https/SSH enhance network security
Jumbo frame Up to 9.6K Bytes
Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Client/Server
SMTP Client
Modbus TCP

Network Redundancy O-Ring
Open-Ring
O-Chain
MRP
Fast Recovery
STP
RSTP
MSTP
RS-232 Serial Console Port RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1
LED Indicators  
Power Indicator  Green : power indicator
System Ready Indicator (STA) Green : Indicates that the system is ready. The LED is blinking when the system is upgrading firmware.
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode.
O-Ring Indicator (Ring) Green : Indicates that the system is operating in O-Ring mode Blinking indicates that the Ring is broken.
Sysem Runnig Indicator (RUN) Green : System is operating continuously
Supervisor Login Indicator (RMT) Green : System is accessed remotely
Reset To Default Running Indicator (DEF) Green : System reset to default configuration
Ping Command To The Switch Indicator (Ping) Green : System is processing “PING” request
10/100/1000Base-T(X) RJ45 port indicator Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator. Right Amber for full-duplex indicator.
1000Base-X SFP port indicator Green for port Link/Act.
Power  

Input power

AC 100~240V/AC, 50-60Hz

Power Consumption (Typ.)

36 Watts

Overload current protection

Present

Power  

Input power

AC 100~240V/AC, 50-60Hz

Power Consumption (Typ.)

36 Watts

Overload current protection

Present

Physical Characteristic  

Enclosure

19-inch rack-mountable

Dimension (W x D x H)

279.4(W)x300(D)x44(H) mm (11 x 11.81 x 1.73 inch)

Weight (g)

2700 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 84,479
Warranty 5 years

Rugged Science is an ISO 9001 Certified Company